DATAKOM DKG-119 manual and remote start unit
-DESCRIPTION The Datakom DKG-119 is a comprehensive generator control unit designed to start and stop the generating set both manually and remotely. The manual control is made using the pushbuttons on the front panel. The remote control is made via the REMOTE START input signal. In AUTOMATIC position, DKG-119 monitors the REMOTE START signal and
The Datakom DKG-119 is a comprehensive generator control unit designed to start and stop the generating set both manually and remotely. The manual control is made using the pushbuttons on the front panel. The remote control is made via the REMOTE START input signal. In AUTOMATIC position, DKG-119 monitors the REMOTE START signal and controls the automatic starting, stopping and load transfer of the generating set. Once the generator is running, it monitors internal protections and external fault inputs. If a fault condition occurs, the unit shuts down the engine automatically and indicates the failure source with the corresponding red led lamp and text.
The operation of the unit is controlled with front panel pushbuttons. The RUN, AUTO and STOP pushbuttons select the operating mode. Other buttons select the display parameter scroll, alarm mute and lamp test functions. The DKG-119 provides a comprehensive set of digitally adjustable timers, threshold levels, input and output configurations and operating sequences. The unauthorized access to program parameters is prevented by a 3 level password protection. All programs may be modified via front panel pushbuttons, and do not require an external unit. The fault conditions are considered in 3 categories as Warnings, Loaddumps and Shutdown Alarms. Measured values have separate programmable limits for warning and shutdown conditions.
The unit is able to send SMS messages in fault conditions. Last 100 faults are stored in the event log file. The event log includes a comprehensive list of measured genset parameters at the time that the fault has occurred. The unit offers the magnetic pickup input as standard for engine rpm measurement.
The service request warning turns on at the expiration of either engine hours or time limits.
More on controllers4generators.com
- Low cost controller designed to start/stop a generator manually and remotely
- Suitable for 1-3 phase gasoline and diesel gensets
- Designed for front panel mounting
- Survives cranking dropouts
- Generator protection, built-in alarms and warnings
Click Here For More Information