eBoot 2-in-1 HD Color Car Rear View Backup Camera

April 24, 2016 - Comment

Easy Installation: 1. Mount the camera to your car’s license plate area, back window, or any other suitable place. 2. Adjust the lens of the camera to its useful position. 3. Connect power wire (red and black) to your vehicle DC 12V power system. 4. Connect the video output (yellow wire) of the camera to


Easy Installation:
1. Mount the camera to your car’s license plate area, back window, or any other suitable place.
2. Adjust the lens of the camera to its useful position.
3. Connect power wire (red and black) to your vehicle DC 12V power system.
4. Connect the video output (yellow wire) of the camera to the display in your vehicle.

Specification Parameter:
Rated voltage: DC 12V
Power cost: Max 1W
Image sensor: color CMOS
Resolution: 420 TV lines
Total Pixels: 648*488 pixels
Resolution: 600TVL (Enhanced)
View Angle: 170 degree
Mini lumination: 1Lux (CMOS)
Video output: 1.0 Vpp composite video at 75 ohm
Waterproof level: IP67

Package included:
1 x Car Rear View Camera
1 x Video Cable
1 x Power Cable
1 x Flush Mount Hole Drill
1 x Mount Bracket
2 x Screws
1 x User Manual

Product Features

  • Perfectly solve the issue of bad car rear view effect; Useful even in dark place
  • Provide you 170 degree wide angle view makes sure you can see enough to park and reverse safely
  • Hi-definition color CMOS, clear image and waterproof grade IP 67
  • The distance scale line will help you with parking, reversing and depth perception
  • Two installation methods for you to choose, easy to install and operate

Click Here For More Information

Comments

Write a comment