BW® 7 Inch TFT LCD Reverse Mirror Monitor IR Night Waterproof Car Wireless Reversing Parking Backup RearView Camera System

October 24, 2014 - Comment

Specifications:MonitorScreen Size: 7″ Colour TFT LCDAspect Ratio: 16 : 9Resolution: 480W * RGB * 234HVideo System: PAL/NTSCVideo Inputs: 2-channel ( AV1 & AV2)Power Supply: DC 12VPower consumption: Around 7W Operation Temperature: -20 ~ 65 Celsius DegreeCameraImage Sensor: Color CMOSLens Angle: 135 DegreeSensing area: NTSC 4.08 x 3.10mm– Effective Pixels: NTSC 510*496 pixelsHorizontal Resolutions: 420 TV

Screen Size: 7″ Colour TFT LCD
Aspect Ratio: 16 : 9
Resolution: 480W * RGB * 234H
Video System: PAL/NTSC
Video Inputs: 2-channel ( AV1 & AV2)
Power Supply: DC 12V
Power consumption: Around 7W
Operation Temperature: -20 ~ 65 Celsius Degree
Image Sensor: Color CMOS
Lens Angle: 135 Degree
Sensing area: NTSC 4.08 x 3.10mm
– Effective Pixels: NTSC 510*496 pixels
Horizontal Resolutions: 420 TV lines
Minimum Illumination: 0.1 – 0.5Lux/F=1.2
Video output: RCA connector, 1.0V p-p, 75ohm
Power Consumption: 60mA
Power Supply: DC12V
– Operating Temperature: -20 – 60 (Celsius Degree) RH95%MAX
Package includes:
1 x 7″ Mirror Monitor
1 x Convert Cable
1 x 2.4G Wireless Car Rear View Camera
1 x Transmitter
1 x Receiver
1 x User Manual
This camera has a mirror image.
You can install the camera on your license plate. During installation, please connect the power cable of the backup camera to the harness wires that connect to the backup light on the tail light assembly (Please note that the red wire end is positive, while the black one is negative). And connect the RCA output end to the car monitor.
The camera switch is controlled by the reverse gear shift.
– Please take care of the sealing to prevent water leakage when installation.

Product Features

  • Delicate design, stable performance, clear picture and excellent color effect;
  • Support both key operation and remote control;
  • Easy installation, only clip the monitor on the original rear view mirror;
  • 2-channel video inputs (AV1 for DVD player/AV2 for Backup camera) and automatically throw-over;
  • As a monitor, it is available for DVD/VCR/GPS/Camera, especially designed for rear view camera.

Click Here For More Information


Write a comment