Seventy-four-piece bit and driver set:
- Ten flat bits (inch): 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 9/32, and 5/16
- Nine Phillips bits: one No. 0, one No. 1, three No. 2, one No. 3, one No. 4, and two drywall No. 2
- Four square bits: S0, S1, S2, and S3
- Sixteen star drive bits: T5, T5.5, T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T35, T40, T45, and T50
- Five Pozi bits: PZ0, PZ1, PZ2, PZ3, and PZ4
- Twelve SAE hex bits (inch): 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 9/32, and 5/16
- Ten metric hex bits (millimeter): 1.5, 2, 2.5, 3, 4, 5, 5.5, 6, 7, and 8
- Five clutch bits (inch): 1/8, 5/32, 3/16, 1/4, and 7/32
- One 1/4-inch hex by 1/4-inch drive socket adapter
- One ratchet driver
- One organizer carry case (for all components)
|
Thirty-four-piece security bit set:
- Nine tamper star drive bits: TR8, TR10, TR15, TR20, TR25, TR27, TR30, TR35, and TR40
- Six SAE tamper hex bits (inch): 5/32, 9/64, 1/8, 7/64, 3/32, and 5/64
- Six metric tamper hex bits (millimeter): 2, 2.5, 3, 4, 5, and 6
- Four tri-wing bits: 1, 2, 3, 4
- Four spanner bits (millimeter): 4, 6, 8, and 10
- Three torque bits (millimeter): 6, 8, and 10
- One (2-5/15-inch) magnetic extension bit holder
- One (32-slot) bit organizer
Twenty-seven-piece precision bit and driver set (for electronic devices):
- Three flat bits (millimeter): 1, 1.5, and 2.5
- Four Phillips bits: No. 000, No. 00, No. 0, and No. 1
- Three star drive bits: T3, T4, and T5
- Six tamper-resistant star drive bits: TR6, TR7, TR8, TR9, TR10, and TR15
- Two tri-wing bits: TRI 0 and TRI 1
- Two pentalobe bits: TS1 and TS5
- Two nut drivers (millimeter): 4 and 5
- Two bit organizers
- One precision driver
- One spudger
- One storage case
|
Comments